Equipment

Cables, connectors, hardware

Tether cables, spools, wet-mate connectors, buoyancy and mounting hardware.

19 items in this category

Every item states what it is for and when it is used; the specifications open on a link. If you are unsure what suits your task, mark several options and describe the site in your request - we will specify it for you.

СКР-8001

Underwater tether cable

The cable linking vehicle to console: power, video and commands. Neutral buoyancy - it neither drags the vehicle down nor floats up.

Specifications

Watertight construction, neutral buoyancy
Polyurethane outer jacket
Polyethylene or PTFE insulation
Single- and double-layer versions
Conductor count, cross-section and breaking strength selected for the task

СКР-8002

Cable spool 100 m

Spool for 100 m of tether. A slip ring allows operation without paying out the full length.

Specifications

Manual winding and paying out
Aluminium alloy frame
Built-in slip ring
Version without wheels

СКР-8003

Cable spool 200 m

200 m spool on wheels - moved by one person.

Specifications

Manual winding and paying out
Aluminium alloy frame
Built-in slip ring
Wheeled frame

СКР-8004

Cable spool 300 m

300 m spool for work at a distance from the launch point.

Specifications

Manual winding and paying out
Aluminium alloy frame
Built-in slip ring
Wheeled frame

СКР-8005

Cable spool 500 m

500 m spool for extended structures: pipelines, cable routes, long quay walls.

Specifications

Manual winding and paying out
Aluminium alloy frame
Built-in slip ring
Wheeled frame

СКР-8006

Wet-mate connector kit

Connectors that mate underwater. Allow changing equipment on the vehicle without recovery and drying.

Specifications

2, 3, 4, 5, 6 and 8 pin versions
Stainless steel housing with high seawater resistance
Standard pin layout, 7/16 UNF thread
Interchangeable with same-size products from other makers

СКР-8007

Underwater connector 2-10 pins

Multi-pin connector for attaching equipment to the vehicle. Mated at the surface before launch.

Specifications

Aviation-type connector
From 2 to 10 pins
316L housing
For cable up to 8 mm outer diameter
200 m depth rating

СКР-8008

Buoyancy foam block

A block offsetting the vehicle weight in water. Sized so the vehicle hovers in the water column, neither surfacing nor sinking.

Specifications

Syntactic foam of hollow microspheres
Density selected for depth ratings up to 6000 m
Shaped to the customer's drawing

СКР-8009

Cable pulling grip

Grip securing the tether to the vehicle: removes load from the connectors when the tether goes taut.

Specifications

Polyamide
100 kg breaking strength
650 mm long
For cable of 7-12 mm diameter

СКР-8010

Cable penetrator

Passes a cable through the vehicle wall while keeping the seal. The basis of any subsea build: without penetrators, power and signal cannot leave the housing.

Specifications

Watertight cable pass-through
O-ring sealed
Threaded mounting

СКР-8011

M8 gland penetrator

Penetrator with a gland: the cable is clamped rather than potted, so it can be repositioned or replaced without destroying the fitting.

Specifications

M8 thread
Collet cable clamp
Cable can be replaced without destroying the gland

СКР-8012

M10 copper gland penetrator

Brass body: better seawater resistance and heat dissipation when carrying high current.

Specifications

M10 thread
Brass body
For high-current circuits

СКР-8013

Gland penetrator

Penetrator for cables of any diameter within range. One size covers several applications.

Specifications

Clamp covering a range of cable diameters
O-ring sealed

СКР-8014

Cable penetrator blank

Fitted into an unused hull opening. Allows spare openings to be built in and used later as needed.

Specifications

Closes an unused port
Same mounting size as the gland

СКР-8015

UNF blank plug

Blanking plug with UNF thread - the standard used in subsea equipment.

Specifications

UNF thread
O-ring sealed

СКР-8016

Penetrator connecting tube

Joins two penetrators: allows a cable to pass through two walls or forms a demountable assembly.

Specifications

Joins two glands
Sealed on both sides

СКР-8017

Underwater cable

Cable for subsea installation: the jacket neither swells in water nor stiffens in the cold.

Specifications

Stranded conductors
Jacket resistant to water and low temperatures

СКР-8018

Underwater shielded cable

Shielded: used for signal lines running alongside power - otherwise thruster interference reaches the video and telemetry.

Specifications

Shielded
For signal lines routed alongside power lines

СКР-8019

Underwater connector

Demountable connection for subsea installation: an assembly can be removed for service without cutting the cable.

Specifications

Connectorised joint
Watertight construction

Price depends on volume and delivery terms. Mark the items, send the request and we will come back with a quote.

Other categories

Underwater vehicles Sonars Thrusters and actuators Manipulators and controllers Cameras Lighting Lasers and sensors Power and communication Control consoles Tools and assembly hardware